
Varnish
A transparent finishing layer available in gloss, satin, or matte effects. It enhances the printed surface and adds an extra layer of visual appeal and light protection.
Wedge-shaped boxes for one slice of pie, made to the pie you bake and the number of slices you cut from it. Orders start from 100 units.
A slice box takes its shape from a pie that has not been cut yet. Get the box right and every slice from that pie drops into it neatly; get it wrong and the slices slide about or get squeezed at the sides.
Measure the baked pie across its widest point, which on a pie with sloping sides is the top. The angle at the point of the box comes from how many portions the pie is cut into, and the more portions, the narrower each wedge. The length is less obvious. A slice’s crust end is curved, but the back wall of a wedge box is flat, so the sides have to run a little further than centre to edge for the crust to clear the back wall. The wider the slice, the more the crust bulges, so a pie cut into a few big portions needs noticeably longer sides than its own half-width. A box made for one cut will not suit a slice cut another way, so the cut is worth settling before the boxes are made. The height follows the pie’s depth, with room above the top crust or any cream. A whole pie, before it is cut, goes into a box such as 10×10 Pie Boxes. For pizza sold by the slice, see Custom Pizza Slice Boxes.
A slice goes in from above and sits flat, crust against the wide end and point in the narrow one, and the lid folds down over it. Laying the slice on a square of greaseproof paper gives the customer something to lift it out by, so a cut face is not dragged along the wall. Greaseproof sheets can be supplied on request.
Pastry is buttery, and a fruit or custard filling can weep from the cut faces onto the base. Grease-resistant board is available depending on the specification. A coated face can improve its grease resistance. Where a filling is likely to weep, a moisture barrier construction is available too, again depending on the specification. Food-contact material suitability is confirmed for the specific material before production.
The boxes can be made in natural kraft or white board. A wedge can also be printed to look like a slice of pie itself, with a crust edge and a swirl of cream, and used to hold small gifts or sweets. The design wraps every face of the wedge, so it is laid out on the flat sheet before the box is folded. Printing can be offset, digital or screen, whichever suits the specification and the order quantity.
Orders start from 100 units. Design support is free. A digital 3D mock-up is free. There are no setup fees. Standard production takes 6 to 8 business days after approval. UK delivery is free.
| Box Style | All Custom Packaging |
| Dimension | All Custom Sizes & Shapes |
| Quantities | 100-unit minimum order |
| Paper Stock | Kraft, corrugated, rigid board, cardstock |
| Printing | CMYK, Pantone, digital and offset |
| Finishing | Gloss, matte, spot UV, embossing, foiling |
| Shipping | Free delivery options |
Choose from premium coating, board, printing and finishing options for your insert boxes.

A transparent finishing layer available in gloss, satin, or matte effects. It enhances the printed surface and adds an extra layer of visual appeal and light protection.

A UV-cured coating applied to specific areas of the design to create gloss or matte contrast and draw attention to important details.

A smooth, velvety coating that creates a soft tactile feel and gives packaging a refined luxury look. It improves the unboxing experience and supports a high-end product presentation.

A soft, smooth lamination with a refined satin-like finish. It gives packaging a premium feel while keeping the surface elegant, subtle, and easy to handle.

A high-gloss UV coating applied only to selected design areas to create sharp contrast, highlight logos, and add a premium visual effect without coating the whole surface.

A clear, fast-drying water-based coating that adds a smooth protective layer while maintaining a clean and professional surface finish. It is a practical choice for everyday printed packaging.

A durable protective film that helps reduce visible scratches, scuffs, fingerprints, and daily handling marks. It keeps packaging looking clean, polished, and premium for longer.

A bleached kraft paperboard made from a mix of virgin and recycled pulp, offering a clean white surface for crisp and polished packaging designs.

A natural kraft paperboard without coating, made from virgin and recycled pulp. It provides a raw, organic appearance with sturdy packaging strength.

A premium bleached paperboard coated on both sides, designed for excellent print quality, die-cutting, and professional packaging results.

A high-quality bleached paperboard coated on one side. It provides a clean printable face with a premium packaging feel.

A smooth printable paper stock that supports high-resolution graphics, clean text, and rich color output for refined packaging presentation.

A natural kraft paperboard made from strong virgin and recycled pulp. It provides an organic, earthy look for sustainable and simple packaging.

A specialty paperboard with a laminated metallic surface available in gold, silver, and other premium finishes for luxury visual impact.

A specialty paperboard with a laminated holographic surface that creates a reflective, rainbow-like appearance for eye-catching product packaging.

A recycled duplex paperboard with a white printable surface. It is ideal for economical packaging that still requires clean graphics and brand presentation.

A kraft board with a smooth clay-coated white face for quality printing and a natural kraft reverse side for a strong, authentic appearance.

A kraft paperboard with a clay-coated printable top surface and a natural unbleached kraft back. It balances clean branding with a rustic natural look.

A duplex paperboard made with recycled pulp and a coated white printable surface. It delivers smooth print results for affordable carton packaging.

A black-dyed kraft board with a natural paper texture and excellent strength. It creates a bold, premium look for luxury and specialty packaging.

A packaging technique where a die-cut opening is covered with a transparent film, allowing the product inside to remain visible while staying protected.

An embossing technique where the raised design is precisely aligned with printed artwork to improve detail, texture, and overall presentation.

A finishing process in which heat and pressure transfer metallic foil to the surface, creating a premium, shiny, and luxurious effect.

A premium finishing method that combines embossing with foil stamping to create a raised design with metallic color and strong visual impact.

A decorative process that transfers foil onto selected areas of the surface using UV-curable adhesive, creating a bright metallic effect with sharp detail.

A technique that raises a design from the surface without ink or foil, giving packaging a clean, elegant, and textured appearance.

A finishing technique that presses a design into the material to create a recessed impression without using ink or foil. It adds subtle depth and a refined tactile effect.

A fast-curing printing process that uses ultraviolet light to dry ink instantly, delivering sharp detail, vibrant colors, and a premium finish.

A durable printing method that uses a mesh screen and stencil to apply ink to surfaces. It is ideal for bold colors and high-impact packaging designs.

A traditional high-quality printing process that transfers designs from plates to a rubber blanket before printing, making it ideal for large-volume production.

A modern printing method that does not require printing plates, making it cost-effective and efficient for short runs, sample production, and small-batch quantities.

Built with three corrugated layers between four linerboard sheets, providing heavy-duty strength for large or industrial packaging needs.

A standard corrugated structure with one fluted medium and two linerboards, providing dependable strength for everyday packaging.

A corrugated sheet with one flute layer between two liners, offering lightweight strength for protective packaging.

An ultra-thin flute grade designed for lightweight packaging, small retail boxes, and high-quality printed presentation.

A slim flute grade with a flatter surface, ideal for detailed printing, display packaging, and premium retail boxes.

Made with two layers of corrugated medium between linerboard sheets, offering added strength and durability for heavier products.

A versatile corrugated flute that offers balanced compression strength, cushioning, and printability for many packaging applications.

A thinner flute grade with a smooth surface, making it suitable for high-quality printing, precise die-cutting, and neat retail packaging.

A thick corrugated flute profile that provides excellent cushioning, compression strength, and stacking support for protective packaging.

A coated linerboard with an off-white surface, suitable for high-quality printing and a refined packaging appearance.

An unbleached kraft linerboard made from recycled paper pulp, offering a natural look with strong durability for eco-conscious packaging.

A coated semi-gloss linerboard with a smooth white surface, ideal for sharp printing, premium presentation, and retail-ready packaging.

A fully bleached corrugated board with a bright white surface, designed to produce clean, vibrant, and high-quality printed packaging.

A UV-cured ink that dries instantly under ultraviolet light and creates crisp, high-quality print results on a wide range of packaging materials.

A plant-based ink made with soybean oil, offering rich color output and a more sustainable printing option for carton packaging.

A standardized color-matching system used to achieve consistent, accurate brand colors across packaging, labels, and printed materials.

A full-color printing process using cyan, magenta, yellow, and black inks to create vibrant images, gradients, and detailed packaging artwork.
Real feedback from customers who trust us with their custom packaging.
Clear answers about ordering, artwork, production, materials and delivery.
Orders start from 100 units.
An unlaminated paperboard construction may be easier to process through suitable paper-recycling streams than a heavily laminated alternative. Final recyclability depends on the full material and finishing specification and the facilities available locally. We can explain the general recyclability considerations of the selected material and finishing options, so you can make accurate claims on your own packaging.
Then the box is die-cut to your pie's own measurements instead of forced to the nearest stock size. Describe the pie, or send one in to measure, and the dieline is built around it.
Yes. It suits a counter or a gift, where the pie sells itself before the lid is lifted. The mini pie box comes with a window as standard; on other sizes it is added at quote stage, and it does affect cost and recycling.
Small runs are the norm here, not the exception. Orders start from 100 units. A run can be a single logo or a full custom design, whichever the budget suits.
Food-contact material suitability is confirmed for the specific material before production. The right surface for a buttery or wet-filled pie is chosen at the specification stage. We do not attach a grease or barrier rating to a box. Confirming any information printed on the pack remains your business's responsibility, or that of its regulatory adviser.
Orders start from 100 units. Standard production takes 6 to 8 business days after approval. UK delivery is free.