
Varnish
A transparent finishing layer available in gloss, satin, or matte effects. It enhances the printed surface and adds an extra layer of visual appeal and light protection.
A round, cardboard gift box with a separate lid, built with a telescoping or lift-off fit and printed in a wrap that runs continuously round the curve. Orders start from 100 units.
A round box asks two questions a square one never does. How does the lid actually stay on, and how does a printed design go all the way round something with no flat side to sit on. Neither question has an obvious default answer, and this page is mostly about both.
A round lid can do one of two things. It can telescope, meaning it slides down over the base like a cap, which is the classic round-tin look and gives the box a snug, positive close. Or it can simply lift off, sitting on top of the base the way a square two-piece box usually does. Telescoping needs the lid cut close to the base with very little clearance: too loose and it slides off in transit, too tight and it will not seat. A lift-off lid is more forgiving to specify, and suits a box that gets opened and closed repeatedly.
Neither is automatically correct. It depends on what is inside. A candle or a jar sitting upright inside a telescoping lid rarely moves. A soft item like folded fabric or loose confectionery is easier to lift in and out of a box with a plain lift-off lid.
This is the cardboard member of the round family, and that is a deliberate choice rather than the only option. Cardboard folds and dies more easily into a clean cylinder at a lower cost than rigid board, which is why it suits a gift that needs to look dressed up without carrying the weight and price of a rigid build. A round rigid box is thicker, heavier in the hand and reads as more premium, at a real cost difference. Which one earns its keep depends on what is inside and what the buyer is paying for: the object, or the unwrapping.
A flat panel prints as one continuous surface. A cylinder does not: the design wraps around and meets itself somewhere, and that meeting point, usually at the back seam, is where a busy pattern can look obviously joined unless it is planned for. A design built to repeat continuously round the curve avoids the issue entirely. A single focal design is usually placed to land on the front, well away from the seam. This is a decision worth making at the artwork stage, since a design set up for a flat box does not simply wrap onto a round one without adjustment.
Offset, digital or screen printing all apply. Pantone references and CMYK values can be used to manage colour consistency, subject to normal variation caused by the chosen board, ink, coating and production method. Matt and gloss lamination, foil stamping, embossing, debossing and spot UV are available once the finish is settled.
Orders start from 100 units. That minimum applies per design. Standard production takes 6 to 8 business days after approval. UK delivery is free. There are no setup fees. Design support is free. A digital 3D mock-up is free. It is worth using here specifically to see the wrap-around artwork on the actual curve before anything goes to print.
For a heavier, more premium build, that decision sits one level up in Round Boxes, which routes between the cardboard, kraft and rigid versions of this same round shape. For a square or rectangular two-piece box instead of a cylinder, Rigid Boxes With Lids and 2 Piece Rigid Gift Boxes are the direct equivalents. A round shape is rarely the efficient choice where the box has to travel through a parcel network rather than sit on a shelf, and Custom Mailer Boxes is the better starting point there. The wider gift range sits under Gift Boxes.
| Box Style | All Custom Packaging |
| Dimension | All Custom Sizes & Shapes |
| Quantities | 100-unit minimum order |
| Paper Stock | Kraft, corrugated, rigid board, cardstock |
| Printing | CMYK, Pantone, digital and offset |
| Finishing | Gloss, matte, spot UV, embossing, foiling |
| Shipping | Free delivery options |
Choose from premium coating, board, printing and finishing options for your insert boxes.

A transparent finishing layer available in gloss, satin, or matte effects. It enhances the printed surface and adds an extra layer of visual appeal and light protection.

A UV-cured coating applied to specific areas of the design to create gloss or matte contrast and draw attention to important details.

A smooth, velvety coating that creates a soft tactile feel and gives packaging a refined luxury look. It improves the unboxing experience and supports a high-end product presentation.

A soft, smooth lamination with a refined satin-like finish. It gives packaging a premium feel while keeping the surface elegant, subtle, and easy to handle.

A high-gloss UV coating applied only to selected design areas to create sharp contrast, highlight logos, and add a premium visual effect without coating the whole surface.

A clear, fast-drying water-based coating that adds a smooth protective layer while maintaining a clean and professional surface finish. It is a practical choice for everyday printed packaging.

A durable protective film that helps reduce visible scratches, scuffs, fingerprints, and daily handling marks. It keeps packaging looking clean, polished, and premium for longer.

A bleached kraft paperboard made from a mix of virgin and recycled pulp, offering a clean white surface for crisp and polished packaging designs.

A natural kraft paperboard without coating, made from virgin and recycled pulp. It provides a raw, organic appearance with sturdy packaging strength.

A premium bleached paperboard coated on both sides, designed for excellent print quality, die-cutting, and professional packaging results.

A high-quality bleached paperboard coated on one side. It provides a clean printable face with a premium packaging feel.

A smooth printable paper stock that supports high-resolution graphics, clean text, and rich color output for refined packaging presentation.

A natural kraft paperboard made from strong virgin and recycled pulp. It provides an organic, earthy look for sustainable and simple packaging.

A specialty paperboard with a laminated metallic surface available in gold, silver, and other premium finishes for luxury visual impact.

A specialty paperboard with a laminated holographic surface that creates a reflective, rainbow-like appearance for eye-catching product packaging.

A recycled duplex paperboard with a white printable surface. It is ideal for economical packaging that still requires clean graphics and brand presentation.

A kraft board with a smooth clay-coated white face for quality printing and a natural kraft reverse side for a strong, authentic appearance.

A kraft paperboard with a clay-coated printable top surface and a natural unbleached kraft back. It balances clean branding with a rustic natural look.

A duplex paperboard made with recycled pulp and a coated white printable surface. It delivers smooth print results for affordable carton packaging.

A black-dyed kraft board with a natural paper texture and excellent strength. It creates a bold, premium look for luxury and specialty packaging.

A packaging technique where a die-cut opening is covered with a transparent film, allowing the product inside to remain visible while staying protected.

An embossing technique where the raised design is precisely aligned with printed artwork to improve detail, texture, and overall presentation.

A finishing process in which heat and pressure transfer metallic foil to the surface, creating a premium, shiny, and luxurious effect.

A premium finishing method that combines embossing with foil stamping to create a raised design with metallic color and strong visual impact.

A decorative process that transfers foil onto selected areas of the surface using UV-curable adhesive, creating a bright metallic effect with sharp detail.

A technique that raises a design from the surface without ink or foil, giving packaging a clean, elegant, and textured appearance.

A finishing technique that presses a design into the material to create a recessed impression without using ink or foil. It adds subtle depth and a refined tactile effect.

A fast-curing printing process that uses ultraviolet light to dry ink instantly, delivering sharp detail, vibrant colors, and a premium finish.

A durable printing method that uses a mesh screen and stencil to apply ink to surfaces. It is ideal for bold colors and high-impact packaging designs.

A traditional high-quality printing process that transfers designs from plates to a rubber blanket before printing, making it ideal for large-volume production.

A modern printing method that does not require printing plates, making it cost-effective and efficient for short runs, sample production, and small-batch quantities.

Built with three corrugated layers between four linerboard sheets, providing heavy-duty strength for large or industrial packaging needs.

A standard corrugated structure with one fluted medium and two linerboards, providing dependable strength for everyday packaging.

A corrugated sheet with one flute layer between two liners, offering lightweight strength for protective packaging.

An ultra-thin flute grade designed for lightweight packaging, small retail boxes, and high-quality printed presentation.

A slim flute grade with a flatter surface, ideal for detailed printing, display packaging, and premium retail boxes.

Made with two layers of corrugated medium between linerboard sheets, offering added strength and durability for heavier products.

A versatile corrugated flute that offers balanced compression strength, cushioning, and printability for many packaging applications.

A thinner flute grade with a smooth surface, making it suitable for high-quality printing, precise die-cutting, and neat retail packaging.

A thick corrugated flute profile that provides excellent cushioning, compression strength, and stacking support for protective packaging.

A coated linerboard with an off-white surface, suitable for high-quality printing and a refined packaging appearance.

An unbleached kraft linerboard made from recycled paper pulp, offering a natural look with strong durability for eco-conscious packaging.

A coated semi-gloss linerboard with a smooth white surface, ideal for sharp printing, premium presentation, and retail-ready packaging.

A fully bleached corrugated board with a bright white surface, designed to produce clean, vibrant, and high-quality printed packaging.

A UV-cured ink that dries instantly under ultraviolet light and creates crisp, high-quality print results on a wide range of packaging materials.

A plant-based ink made with soybean oil, offering rich color output and a more sustainable printing option for carton packaging.

A standardized color-matching system used to achieve consistent, accurate brand colors across packaging, labels, and printed materials.

A full-color printing process using cyan, magenta, yellow, and black inks to create vibrant images, gradients, and detailed packaging artwork.
Real feedback from customers who trust us with their custom packaging.
Clear answers about ordering, artwork, production, materials and delivery.
It is a specification difference rather than a fixed price rule, so the honest answer is that it is confirmed at quote. What drives it is the tighter tolerance a telescoping fit needs, not the lid style by name.
It arrives empty, for you to fill and close yourself. Nothing about the round shape or the lid changes that; it is packaging, not a fulfilment service.
Not as it stands, and it's worth knowing that before sending it over. Artwork built for a flat panel assumes straight edges and no seam, and a round box has neither. It needs adapting rather than resizing, which is a real piece of design work rather than a formality.
Orders start from 100 units. That minimum applies per design. Standard production takes 6 to 8 business days after approval.
An unlaminated paperboard construction may be easier to process through suitable paper-recycling streams than a heavily laminated alternative. A plain cardboard round box with no window or foil is a straightforward case by comparison. Final recyclability depends on the full material and finishing specification and the facilities available locally.